Home > PRODUCTS > LED Panel Light > RGB LED Panel
Full Color(RGB) LED Panel Light 600mm 42W
FEATUREProduct Parameters

Quik Info:

1, LEDs imports from First class Taiwan Epistar
2, PLCC-2 Packing Tech better head sink performance
3, PCB is tightly stuck to AL frame, good heat dissipation
4, External UL driver with 3PCS capitance(5000hours at 105 degree celsius)
5, Double diffusion design, soft light and without dazzling
6, Special circuit design is non-interfering whereon disabled LEDs
7, Japan imported LGP, Light transmission rate>90%
8, Reinforced package play for sea, airport, express freight
9, CE & RoHS certificate
10, Offer 3 years Quality Guarantee under warranty terms
11, Male-female connector is convenient to replacement of driver



LED Panel light advantage:

1, High lumen+high CRI+UL Isolated driver
2, High precise current source(± 2.5%)
3, Overvoltage protection
4, Short-circuit protection
5, Overload protection
6, Meet EU-EMC & LVD
7, Double insulated wire
8, spring type available for directly install on fireproof ceiling
9, no UV or IR emissions
10, No obvious chromatic aberration
11, Uniform light, No any shadow and darkness spot
12, Individual inner and outer packing
13, Light failure at 50000 Hours(LM80)
14: Recessed/surface mounted/suspended installation available



LED Factory advantages:

1, Annually invest third of our profit in our R&D department
2, Own Design, Die-Casting, Assembly, QC, International Sales Team
3, Absolute Service Dept for pre-sale service and after service
4, Production Capacity: LED panel light 20, 000PCS/Month
5, IS09001-2008 Management system
6, Full automatic aging testing line.
7, Constant temperature humidity chamber testing machine
8, Over 15 years listed company engineer sevice for Jorich
10, has been resolved bright edge, bright spot, black water ripple problem




1, Meeting rooms/school classrooms/office buildings.
2,Supermarkets/home lighting.
3,Hospitals/ churches/factories/hotels.
4,Other commercial and residential place.




1, Product life time defined as when the Flux (Lm) output from general light is 70%
Of the Flux (Lm) output from Initial light, then it is the end of the products life
2, In the same illumination (Lux), the 36W output power LED panel can instead of
The traditional 3*18W fluorescent light, the 54W output power LED tube can instead of
The traditional 3*36W fluorescent light
3, Cut off the current first and follow the steps to install the LED panel light
4, Tear up the prodctive film before replacement of the LED panel
7, The panel light must work under the right voltage according to the specification
8, Don't take the LED panel light apart
9, Recommend indoor use